AQUAPOXY

Two Components Water-Based Epoxy Primer

Cat. No. B425, A425

Aquapoxy is Environmentally friendly, low odor, does not contain any solvents.

Aquapoxy has good chemical resistance, excellent durability, and excellent adhesion properties for polyurethane and acrylic systems.

Application

Aquapoxy is used as a primer for concrete and old polyurethane prior to application of Aquagreen and Aquatech.

Aquapoxy can be used also as a primer for Multigum, prior to application on concrete, old acrylic and old polyurethane coatings.

Technical Data

Surface Preparation

The surface will be clean, dry, stable, without loose particles. In case of concrete, the surface will be washed with high pressure water jet (500 bar or by sand blasting), to remove the surface cement skin and expose concrete holes.

Afterwards, the surfaces will be treated according to the instructions of the designated coating.

Preparation of the Product

Pure Aquapoxy part B (2.90 kg) into Aquapoxy part A (6.80 kg), mix slowly (100-200 rpm) the two components by electric drill mixer for 3-5 minutes to obtain homogeneous material and let it rest for 10-20 minutes prior to coating.

Instruction for Use

Aquapoxy may be applied by brush, roller or airless spray, in a quantity of 250 gr/m². See the instructions of the designated coating

Drying time

Drying time prior to application of next layers: 12 hours (at 25ºc and 50% RH).

Consumption

250 gr/m² on concrete

Storage

In a shade, protected against frost and high temperatures (5ºc - 35ºc).

Packaging

Part A – 6.80 KG

Part B – 2.90 KG

Warning and safety measures

• Aquapoxy is hazardous to swallowing, wash your hands in water and soap immediately after use.
• Aquapoxy is not to be applied 24 hours before rain or 6 hours before dew.
• Aquapoxy is not to be applied at temperatures lower than 5ºc.
• Aquapoxy is not to be applied a short time before dust storms.
• Aquapoxy is not to be thinned, and water or any other substance must not be added.

Related Documents

AQUAPOXY_ENG.pdf